Scaffold and Formwork

Forged swivel fitting by Strongforge, used for connecting two 48.3mm tubes at any angle. This fitting is designed for use in all types of scaffolding construction, most often employed where diagonal bracing is required and also in lighting rigs, staging and guard rails.

All of our drop forged scaffold fittings are zinc plated for longer life, manufactured to BS1139 (Part 2) & EN74 and tested to ensure the highest level of quality control.

This fitting is also available as a pressed steel fitting

This fitting forms a key part of any scaffold together with double, sleeve and single couplers. We also stock new and used steel scaffolding tube in addition to aluminium scaffold tube..

A fixed ninety degree, rigid coupling by Strongforge, used for connecting two 48.3mm tubes at right angles. This heavy duty fitting is designed for use in all types of scaffolding construction and also in lighting rigs, staging and guard rails.

All of our drop forged scaffold fittings are zinc plated for longer life, manufactured to BS1139 (Part 2) & EN74 and tested to ensure the highest level of quality control. Our drop forged doubles are Class B.

This fitting is also available as a pressed steel fitting

Info        Detail
Suitable Tube      48.3mm
Quality Standards             BS1139 & EN74B
Weight  1kg
Material               Zinc Plated Steel

A ninety degree, rigid coupling by Strongforge, used for connecting two 48.3mm tubes at right angles.  This fitting is designed for use in all types of scaffolding construction and also in lighting rigs, staging and guard rails.

All of our pressed scaffolding fittings are zinc plated for longer life, manufactured to European Quality Standard EN74B and tested to ensure the highest standards of quality control. Our pressed doubles are Class B.

This scaffold clamp is also available in drop forged steel

This coupler is most often used together with single, sleeve and swivel couplers to create a scaffold out of new or usedscaffolding tube or aluminium scaffold tube. This fitting is the cornerstone of any scaffold framework.  You may also be interested in our range of drop forged scaffolding fittings.

Pressed sleeve coupler by Strongforge, used for connecting two 48.3mm tubes end on end. This fitting is designed for use in all types of scaffolding construction and also in lighting rigs, staging and guard rails.

All of our pressed scaffolding fittings are zinc plated for longer life, manufactured to European Quality Standard EN74B and tested to ensure the highest levels of quality control. Our pressed sleeves are Class B.

This coupler is most often used together with double, single and swivel couplers to create a scaffold out of new or usedscaffolding tube or aluminium scaffold tube. It is also used to increase the height of radio masts.  You may also be interested in our range of drop forged scaffolding fittings.

Our Scaffolding Planks are produced using European Whitewood. They are Graded, End Banded and the finest quality in Europe.

Forged single coupler by Strongforge, connects two 48.3mm tubes at right angles. This fitting is designed for connecting board supports (transoms) or putlogs to ledgers in scaffolding and also used in lighting rigs, staging and guard rails. Single couplers can also be used to secure toe boards on a scaffold. This fitting is not designed to be load bearing – use a double if that is what you need.

All of our drop forged scaffold fittings are zinc plated for longer life, manufactured to BS1139 (Part 2) & EN74 and tested to ensure the highest level of quality control.

This fitting is also available as a pressed steel fitting

This fitting is most often used together with double, sleeve and swivel couplers. We also stock new and used steel scaffolding tube in addition to aluminium scaffold tube, you may also be interested in our range of scaffold boards, scaff ancillaries and safety products

Heavy duty 6m galvanised steel scaffolding tube, 48.3mm outside diameter with 4mm wall thickness.  Our scaffold poles are manufactured to EN39 European Standard.

Pressed single coupler by Strongforge, used for connecting two 48.3mm tubes at right angles. This fitting is designed for use in all types of scaffolding construction and also in lighting rigs, staging and guard rails.

All of our pressed scaffolding fittings are zinc plated for longer life, manufactured to European Quality Standard EN74B and tested to ensure the highest levels of quality control.

This scaffold clamp is also available in drop forged steel

This coupler is most often used together with double, sleeve and swivel couplers to create a scaffold out of new or used scaffolding tube or aluminium scaffold tube. It is also used as an alternative to board retaining clamps when securing toe boards.  You may also be interested in our range of drop forged scaffolding fittings.

Steel board clamp by Strongforge, used for securing scaffolding boards to a platform or holding toe boards in place on a deck. This fitting is designed for use in all types of scaffolding applications where scaffold boards need to be secured.

All of our scaffolding fittings are zinc plated for longer life, manufactured to European Quality Standard EN74 and tested to ensure the highest levels of quality control.

This clamp is most often used to fix scaffolding planks to a platform or other tube structure. It is compatible with our new or used scaffolding tube or aluminium scaffold tube. You may also be interested in our range of scaffolding boards and other scaffold ancillaries.

Our 4m (actual length 3.962m) steel scaffolding ladders are manufactured from lightweight galvanised steel box sections, combining strength and durability into a ladder perfect for scaffolders.

They feature:

Non-Slip Rungs

Heavy Duty Feet

These ladders are also available in 3m, 5m, 6m, 7m and 8m lengths.